Create Node

Designed in the drawing a node by input of the node coordinate.

The common function settings are described under Function Adjustments.

Line division permit – A node on a line placed leads this adjustment to the line division. To isolate otherwise the node created without the line.

Note: Lengths of the isolated lines according to the division ratio one determines (i.e., contrary to the new creation of pipes) length is not calculated again from the diagram.

➤ In order to create a new network node, you must carry out the following steps:

Click Create Node (sisHYD > Tools > Construction).
Click on the node coordinate in the drawing.

.jpg
If the node dialog is opened, the display is changed on the created data record and is available for handling.
Note: If you placed the node in a flow design, SISHYD always creates a flow node, even if in the data set last displayed, the flow was not activated. The marker field position for return and KLB leader is transferred. See configuration dialog "Nodes".